COMMERCIAL AVIATION & INDUSTRIAL EQUIPMENT AUCTION

ABSOLUTE AUCTION

Sale Site Phone:  (972) 709-4622

Or call Starman Bros. Auctions, Inc. (402) 592-1933

Ramada Inn

711 E. Camp Wisdom

Duncanville, TX 75116

(972) 298-8911

Best Value Inn

4154 Preferred Pl

Dallas, TX 75237

(972) 298-4747

Holiday Inn Express

1035 E. Hwy 67

Duncanville, TX 75116

(972) 283-8084

Lexington Suites

4150 Independence Dr

Dallas, TX 75237

(972) 298-7014

Motel 6

4220 Independence Dr

Dallas, TX 75237

(972) 296-3331

Sale Order

CLICK HERE for Color Photos

CLICK HERE for Listing of Tools

== FOREMAN’S MODULAR OFFICES ==

(3 ea) Plant Floor Foreman’s Modular Office 14’Lx10’Wx8’T, w/Air Conditioning

(1 ea) Plant Floor Foreman’s Modular Office 26’Lx15’Wx8’T w/Air Conditioning

== PICKUP, GOLF CARTS & FLOOR SCRUBBERS ==

1999 Chevy Silverado 1500 Pickup, Auto, Pwr. Steering, AM/FM Cassette, A/C, Tilt Wheel, Cruise, 4.3 Liter, 6 Cyl

Tennant Mdl. 528 Drive Around Floor Cleaning Machine, Propane S/N 528-30531

Tennant Mdl. 275 Drive Around Floor Cleaning Machine, Propane

EZ-GO Electric Golf Cart

EZ –GO Electric Warehouse Cart w/ Back Deck

== SHOP EQUIPMENT ==

Hydra Power Mdl DH-13010 Press Brake, 130 Ton, 10’ Bed, 8-1/2” Between Columns, High Speed Position Controller, Stroke Control, Tilt Adjuster, Several Dyes S/N G4062

Sulzer Metco Roadrunner Mobile Flame Spray Sys. w/ Metco 6A Air Control Unit, Flow Rate 35 SCFM Min., Min. Inlet Pressure 90 PSIG, Max 250 PSIG, Opr. Temp 0-175 Degrees F

Pressure Island Mdl. PI-91800 Wash Rack, 18’W x 9’ D, w/ Heater, Ozone & Oil Skimmer

FMB Mdl. TRITON Power Metal Band Saw, 0-60 Degree Cutting Radius, S/N B01416

Kysor Johnson Mdl J Metal Cut-Off Saw W/N H24800

Wellsaw Mdl. 1270 Automatic Metal Cutoff Saw

Do All 36-R Metal Cutting Band Saw, 35” Throat w/ Tilt Attachment S/N 31-52835

Do All Mdl 3613-2 Metal Cutting Band Saw, 36” Throat w/Blade Welder S/N 151-61094

Rockwell/Delta, Mdl 28-365 Metal Cutting Band Saw 20” Throat

Wellsaw Mdl B-20 Band Saw, 20” Throat

Hannifin Hydraulic Press, S/N A-45121-C, 18” Stroke, 8 Ton

Ultrablend Model XHD-XP 5 Gallon Paint Shaker

Pneumatic Paint Shaker, 1 Gal Cans

(2 ea) Walkin Freezers 12’L x 8’W x 8’ Tall

Electro-Tech Systems Model 506A Humidity Control Chamber S/N 787

36”x18”x24”D

Tru-Acc Granite Surface Table 72”L x 48”W x 12”D

Precision Granite Surface Table 48”L x 24”W x 6”D

(2 ea) Steel Layout Tables – 4’ x 12’& 54” x 12’, 6” Thick,

Rockwell Wilson Mdl 103R Hardness Tester

Rockwell Delta Mdl. 70-400 Variable Speed Drill Press

Powermatic Mdl 1150A Drill Press Variable Spd, 450-8000 RPM S S/N 9415V015

Sciaky Model 7681792 Spot Welder, 10” x 36” Throat Dim. 75KVA @ 50% Duty Cycle

Oxygen Acetylene Torch Set, Cart & Bottles

Enco 16” Cut Off Saw

(2 ea) Welding Tables

Welding Curtains

Jones & Lamson Mdl TC-14 Optical Comparator

Delta Bench Oscillating Spindle Sander Mdl. 31-780 S/N CD9629

16’ Disc Sander 1 ½ HP

Powermatic Model 31 12” Disc & 6” Belt Sander

Jet Mdl HP-15A, 15 Ton Hydraulic Press

IRT Systems Mdl # IRT-400 Portable Infra-Red Drying Unit

(2 ea) Fairbanks Platform Scale Capacity 1000 lb w/ Digital Read-Out

2 Ton Arbor Press

Ryobi BT-3000 10” Table Saw

Delta 12” Bench Top Drill Press

8’W x 3’D Stainless Steel Rinse Rack

Central Machinery 6” Bench Shear

Stainless Steel Alodine & Water Tanks 2’D x 5’L x 1 ½’T

Several Bench Vices

Several Bench Grinders

(2 ea) Marsh Stencil Machines (1) ½” (1) 1”

Metal Banding Machine

Chicago 30 Gal., Barrel Top Parts Washer

Edwards Two Stage Vacuum Pump

Roll-Around A Frame

Delta 1” Belt & 15” Disk Sander

5000 LB Engine Hoist

(2 ea) 10’ Warehouse Maintenance Ladder

(1 ea) 3’ Warehouse Maintenance Ladder

Barrel Top Electric Parts Washer

(2 ea) Foot Impulse Hot Sealers

(4 ea) Pallet Jacks

Tinus-Olsen Stress Pull Tester w/Computer Controls

Note:  Most major items to be sold on DAY 1, misc. smaller pieces to be sold on DAY 2.

== WASTE WATER TREATMENT SYSTEM ==

Beckart Environmental 700 Gallon Batch/Filter Press Waste-Water Treatment System

== NDT EQUIPMENT ==

Magnaflux-Magnetic Particle Inspection Unit Type H-710 S/N 802186-Max Output 5000 Amps, 6’ Bed, DC, w/Demag

Dye Penetrant Line to include Stainless Steel Tank 4’x2.5’Dx12” w/4’ Drip Board, Stainless Steel Rinse Tank w/4’ Drip Board and Icon Technical Services – Mdl D-1000 Drying Oven

Parker Mdl DA 400 Contour Probe

Spectroline Mdl SB-100P Blacklite

Good Selection of Magnaflux Chemicals

== MICRO FILM, READER PRINTERS, BLUE PRINT EQUIP, & MANUALS ==

(4 ea) Canon Micro Printer 90 Microfilm Reader Printers

Lg Selection of Microfilm Cartridges, Predominantly Boeing Aircraft, Service Bulletins, SRM’s, CMM’s, OHM’s

Canon NP Printer 700 Aperture Card Reader

Several Aperture Cards from Boeing & Douglas

Hewlitt Packard – Draft Master SX Blue Print Machine

Kueta Drafting Table

Very Large Selection of Manuals for All Models of Commercial Aircraft Component Overhaul

Several Component Blueprints

== AIR COMPRESSORS & DRYERS ==

Ingersoll-Rand Mdl. SSR-EPE100-2S Rotary Screw Air Compressor, Capacity 504 CFM, Rated Operating Pressure 125 PSIG, 100 HP, S/N FF1082U96116

Ingersoll- Rand Rotary Compressor Mdl. # SSR-EP75, Capacity 332 CFM, Rated Opr Pressure 125 PSIG 75 H/P S/N CK2895U00024

Ingersoll-Rand Mdl. SSR-EP40SE, Screw Air Compressor 157 CFM Capacity, 125 PSIG Operating Press, 40 HP

Ingersoll-Rand Mdl. TS-700 Air Dryer (Air Cooled Dryer Cooling System) S/N DR10010994-010901

Ingersoll – Rand Refrigerated Compressed Air Dryer – Mdl # XR425 – New 2000

Ingersoll-Rand Mdl. DXR 100 Refrigerated Compressed Air Dryer

Ingersoll-Rand Mdl. DXR200 Refrigerated Compressed Air Dryer, 98

Ingersoll-Rand Mdl. 3000E30, Two Stage Industrial Air Compressor, 30 HP, 3 PH, 240 Gal Vertical Tank, 1997

(2 ea) Ingersoll-Rand Mdl. NLM-2, NL Modules

(2 ea) 400 Gal Vertical Air Storage Tanks, Year 2000

240 Gal Vertical Air Storage Tanks, Year 2000

== FIRE PROOF & METAL CABINETS ==

(2 ea) Lyon Heavy Duty 2 Door Metal Cabinets 4’W x 2’D x 6 ½’H

(20 ea) 2 Door Fire Proof Metal Cabinets 3 ½’W x 65” H

(50 ea) Tennsco & Misc 2-Door Metal Cabinets

Note:  Majority of these items to sell on DAY 2.  Misc. sells on DAY 1

== PRECISION & MISC HAND TOOLS ==

Zetec Mdl. MIZ-21A Eddy Current Instrument

12 & 18” Height Guage

Raytheon Palm Infrared Pro Camera

Webster Hand Held Mdl. 1B Hardness Tester

Various Multimeters

Fowler Depth Gauge

Telescoping Gauges

Small Hole Gauges

Pneumatic Nut Plate Drill

Proto Mdl. 6212 Torque Multiplier

Conductivity Tester

Heat Guns

Pneumatic Gravity Feed Paint Guns

Lg Selection: Air Hoses, Extension Cords

Clecos

Pneumatic & Manual Grease Guns

DeWalt 7” Grinder

Pneumatic Line & Orbital Sander

WCI-HP-20 Hand Puller

Dymo Manual Label Makers

Bro. Electronic Label Machine

Misc. Torque Wrenches

Various Elec. Drills

== SHEET METAL EQUIPMENT ==

Cincinnati Mdl 1010 Century W Series 10’ Power Shear, Precision Back Gage, S/N 100080

National 52” Power Shear Mdl. NH5216, 16 Guage Cap.

Marchant Mdl. 12A Pneumatic Sheet Metal Shrinker Stretcher w/ Both Sets of Jaws, 11 ½” Throat

US TOOL Mdl. # USPF150 Shrinker Stretcher, Foot Operator w/2 millimeter & 1.5 millimeter Shrinker Stretcher Jaws

72” Power Sheet Metal Roller

Tennsmith Mdl. SR42 Sheet Metal Roller 42”

Pexto Mdl. 416-E Sheet Metal Slip Roller 36”

Aircraft Tools Hot Dimpling Machine 36” Throat w/ Thermomatic Dimpling Control Unit S/N 7044

Chicago Pneumatic Compression Riveter w/36” Throat

Farnham Roll Former Mdl 75ST 15’ Bed

Tennsmith Mdl. HBU 4816, 48” Finger Break 16 Guage Cap

English Wheel 44” Throat

Hi Shear model BP700 Air-Hydraulic Power Unit & Blind Nut Driving Gun

Hi Shear Model BH25AC Hyd Hand Drive Unit For Blind Fasteners

== PAINT & DUST COLLECTION BOOTHS ==

(2 ea) Dustron Mdl. DB-24-36-2X15 Dust/Paint Booths 24’Wx12’Dx7-½’H, (2) 15 HP Blower Motors, 36 Filtering Cartridges, Air Filtering Operation, Compressed Air Cleaning Sys, Fire Extinguisher Sys, Explosive Proof Lighting

Dustron Filter 1 Dust/Paint Booth Mdl DB-8-12-7.5, 8’Wx12’Dx7 ½’H, (1) 7.5 HP Blower Motor, 12 Cartridges, Air Filtering Operation, Compressed Air Cleaning Sys., Fire Ext Sys, Explosive Proof Lighting w/ Sound Absorbing Insulation Wall Panels

Spray-Tech Paint Booth 24’ Long x 12’6” W x 9’H, Explosion Proof Lights, Fire Extinguisher System, Water Filtration System

(4 ea) UAS Mdl. # SCI700 Dust Hog, Dust Collection System w/4’ x 2’ Down Draft Table; New in 2000

Several Metal Paint Dryer Racks on Castors 8’, 15’ & 24’ Long

== FORKLIFTS & MAN LIFTS ==

Clark Mdl. C500-800 Fork Lift, 7100 lbs. Triple Stage 18’ Mast, Hard Rubber

Komatsu Model FG25S Forklift, 5000 lb., Propane, 18’ Triple Stage Mast, Hard Rubber

Yale – Mdl. # GLCO5ORGNUAEO82 Forklift 5000 lb., Propane, 18’ Triple Stage Mast, Side Shifting Forks, Hard Rubber

Crown Mdl. RR3520-45 Stand Up Warehouse Fork Lift, Elec, 4500 lb Triple Stage Mast 24’, Side Shifting Forks

Sky Jack Electric Man Lift Mdl. SJ6832, Platform Cap. 1000 lbs., Retracted 300 lbs Extended, 32’ H, S/N 81207

Genie Mdl. Z-30/20HD Elec Boom Lift, Max Load 500 lbs., 31’ Platform H, S/N 30-Z30-3330

== CNC EQUIPMENT ==

Thermwood Mdl. 42 CNC Router 120” x 60” Aluminum Top Work Table, Motor Spindle Unit has 10.5 HP Motor, 3,000-24,000 RPM, Typewriter Style Tool Changer w/ Five Tool Holder Arms, Table Equipped For Vacuum Hold Down, Series 9100 Supercontrol Control System, 6.4 Gigabyte hard Disk System

Haas Model SL-20T CNC Turning Center, Max Turning Diameter 10.3”, Swing over Apron 23”, Swing over Cross Slide 9.5”, 3700 RPM Variable Speed Spindle, 20 HP Motor, 10 Position Turrett, 2” Through Bore, Tail Stock, Chip Auger, Floppy Drive, 1 MB Memory, Quick Code Programming, Sold w/ Option Package A., New 2000, S/N 63158, HAS Servo Bar 300 Attachment, 2” Through Bore, 60” Length Bar Feed, ¼” to 3 1/8” Diameter Max, Holds 30 ea. 1” Bars in Tray

Haas Mdl. VF-4 CNC Vertical Machining Center, 4 Axis, Haas CNC Control Panel, 22” x 55” Table Working Surface, 50” X Axis, 20” Y Axis, 25” Z Axis Travels, 15 HP High Torque Spindle Drive Motor, 7500 RPM, Variable Speed Spindle, 20 Position Automatic Tool Changer, Programmable Coolant Nozzle, Auger Style Chip Remover, New 1997, S/N  11521

Bridgeport EZ Trak  II CNC Vertical Milling Machine w/ Bridgeport BPC 2M, XYZ Axis, Control Panel, 65” x 11” 3 Slot Table, 50-4200 RPM Spindle Speed Pwr Mister, 2 HP Motor, 6” Riser Block, X Axis Travel 32”, Y Axis Travel 14.5”, Z Axis Travel 5”, S/N 2J168012

Bridgeport EZ Trak II CNC Vertical Milling Machine w/ Bridgeport BPC 2M , XYZ Axis, Control Panel, 65” x 11” 3 Slot Table, 50-4200 RPM Spindle Speed, Pwr Mister, 2 HP Motor, X Axis Travel 32”, Y Axis Travel 14.5”, Z Axis Travel 5”, S/N EZ2CH827

Bridgeport Series II CNC Vertical Milling Machine w/ Acu-rite 3 XWZ Control Panel, 58” x 11” 3 Slot Table, Auto Coolant System, Rapid Traverse, 60-3500 RPM Spindle Speed, 4 HP Motor, Bridgeport Quill Pwr Feed Attachment, X Axis Travel 32”, Y Axis 14.5”, Z Axis 5” S/N 8677E

Bridgeport EZ Trak DX CNC Vertical Milling Machine w/ Bridgeport Easy Trak DX, XYZ Axis, Control Panel, 48” x 9” 3 Slot Table, 60-4200 RPM Spindle Speed, Auto Mister, 2 HP Motor, X Axis 30”, Y Axis 12”, Z Axis Travel 5” S/N 2J162973

Bridgeport Mdl. EZ Trak DXII CNC Vertical Milling Machine w/ Bridgeport EZ Trak DX CNC Control Panel, 11” x 58” 3 Slot Table, 60-4200 Spindle Speed, 2 HP, Auto Mister, X Axis Travel 32”, Y Axis 14.5”, Z Axis 5”, S/N 159843

== MACHINE SHOP EQUIPMENT ==

Vectrax 1550 EVS Metal Working Lathe, 11 ½” Gap Bed, 86 ½” Bed Length, 15 ½” Swing Over Bed, 9 ½” Swing Over Cross Slide, Variable Speed, Tailstock Barrel Diameter 2 5/16”, 18-2500 RPM Spindle Speed, Acu-rite XZ Axis Digital Readout, Quick Change Tool Post Holder, Various Tooling, S/N 6266

Vectrax 1550 EVS Metal Working Lathe, 11 ½” Gap Bed, 86 ½” Bed Length, 15 ½” Swing Over Bed, 9 ½” Swing Over Cross Slide, Variable Speed, Tailstock Barrel Diameter 2 5/16”, 18-2500 RPM Spindle Speed, Acu-rite XZ Axis Digital Readout, Taper Attachment, Quick Change Tool Post Holder, Various Tooling w/ Royal 5C Lever Type Collet Closer, S/N 6086

Acer Mdl. Dynamic 134G Engine Lathe, 52” Bed Length, 7” Gap, 13” Swing, 1 5/8” Tailstock Barrel Diameter, Dorian Tool Post Holder, Coolant Sys, Various Tooling, S/N 1707028

Do All 13 Metal Working Lathe, 13” Swing, 41” Between Center, w/ Darian Tool Holder

Takang Vertical Milling Machine 9” x 48” 3 Slot Power Feed Table, Pwr Feed Knee, Sony Millman, Digital XY Axis Read-out, 3 HP Motor, 60-2400 Spindle Speed

Takang Mdl. 20VS Vertical Milling Machine 9” x 48” Power Feed Table, Power Knee, Sony Millman XY Axis, Digital Readout, 60-4200 RPM Spindle Speed, 3 HP, S/N 331295, New ‘00

Brown & Sharpe Mdl. 13 Universal & Tool Grinder S/N 525-13-393

DO ALL Mdl. VS618-2 Surface Grinder w/Magnetic Chuck

Hardinge – Mdl DSM-59, Second Operation Lathe, 1 HP, 6 Position Turret, 230-3500 RPM

Wells-Index Mdl. 847 Vertical Milling Machine, 50-4200 RPM Spindle Speed, 2 HP Motor, 9” x 47” 3 Slot Table w/ Pwr Feed, Coolant Sys, S/N 21907

Wells-Index Mdl. 847 Vertical Milling Machine, Acu-rite XW Digital Read-out, 50-4200 RPM Spindle Speed, 2 HP, 9” x 46” 3 Slot Table w/ Pwr Feed, Pwr Feed Knee, Mister

Several Roller Stands

== MACHINE SHOP TOOLS ==

Cushman Indexing Head

(11 ea) Kurt Milling Vices

Rotating Milling Tables

Large Selection of Milling Trees, Chucks, End Mill Holders, Cutters, Collets, End Mills, Reamers, Counter Bore Cutters, Cobalt Drills, Center Drills, Counter Sinks, Milling Cutters, Parallel Blks, Drill Bits, Dowell Pins, Socket Head & Cap Screws, Nuts, Bolts, Set Screws, Washers, Etc.

== BLASTING EQUIPMENT ==

Dry Blasting Booth & System, Includes JBI Booth 30’D x 10’W x 8’H, has 8’ Working With Door Opening, Wheelabrator Mdl. 36WCC Dust Collector System, Blasting System is a Aerolyte Single Operator Nova Dry Stripping System, Recovery System w/ TLR-300 Remote Controls, Reverse Pulse Dust Collector, Supplied Air Respirator System

Zero Mdl BNP65-900 Blasting Cabinet w/ 300 CFM Reclaimer & Bag Filter Sys, S/N 51112, New ‘01

(2 ea) Zero Mdl 3048 Inex Blasting Cabinet, 46”W x 28” D x 30”H, w/  Filter Bag, New in 2000

Zero Mdl. 3048 INEX Double Blasting Cabinet w/ Reclaimer & Bag Filter System

== OVENS ==

Gehnrich Mdl. CM816 Re-circulating Electric Oven, 16’D x 7’2”T x 9’4”W Inside Measurements, Up To 800 Degrees F, w/ Honeywell Control Panel, Temp Recorder, Honeywell DPR 250 Recorder, has 8’ x 7’ Double Doors on Both Ends

Precision Scientific Model 524 Small Heat Treat Oven, Temp Range to 230 Degrees Centigrade

Blue M Mdl. SW-17TA Single Wall Transite Oven Temp Range 104 Degrees F – 392 Degrees F

== COMPOSITE REPAIR SYSTEMS ==

(5 ea) Heatcon Mdl. HCS9200, Composite Repair Systems

Zetec Mdl S-9R Bond Tester

Several Benches w/Plastic Tops

== OFFICE EQUIPMENT ==

10’ Cherry Wood Conference Table

(8 ea) Leather High Back Conference Chairs

(5 ea) Cherry Wood Wrap Around Executive Desk Set w/ 72” Desk, Credenza w/ Bookcase

(3 ea) Cherry Wood  2 Drawer Lateral File Cabinets

Bush Cherry Wood Swing-Out Armoire

40” Round Cherry Wood Table & 2 Chairs

(2 ea) Leather Sofas

Cherry Wood Desk & Credenza

(6 ea) Walnut Double Pedestal Desks & Credenzas

Walnut Secretarial Desk w/ L/H Return

(2 ea) Metal Secretarial Desk w/ Return

(11 ea) Metal Dbl. Pedestal Desk – some w/ Credenzas

Cherry Wood Coffee & 1 End Table

6’ Walnut Conference Table w/4 Chairs

12’ 2-Piece Walnut Oval Conference Table w/8 Wood Arm Side Chairs

(16 ea) High Back Exec Chair

(22 ea) Secretarial-Task Chair

(34 ea) Side Chairs

Solid Wood Carved Hall Tree

Coffee & Side Table

Reception Area Couch, 2 Wing Back Chairs, Coffee Table

(43 ea) 4-Drawer File Cabinets

Anderson Hickey & Various Other Manufacturers

(2 ea) Hon 2-Drawer File Cabinets

(25 ea) Lateral Filing Cabinets

2, 4, 5 Drawers

(11 ea) 36” Round Formica Top Break Room Tables

(40 ea) Stacking Break Room Chairs

(3 ea) Microwave Ovens

Several Ozarka Water Coolers

Sanyo Apt Size Refrigerator

Kelvinator-Refrigerator-Freezer

Magic Chef Apt Size Refrigerator

Frididaire & Kenmore Com. Freezer

(21 ea) Wood Book Shelves, 3 & 5 Shelf

Brother Mdl. 9100C MFC Fax

(2 ea) Panasonic Mdl KX-FM210 Plain Paper Fax Machine

Hoshizaki Ice Machine

Emerson 25” Color TV w/ VHS

(7 ea) Metal Book Shelves – 5 Shelf

Epson Power Lt 800P Projector

Lg Selection of Bulletin Boards & Grease Boards, To Include Aluminum Enclosed Boards

(12 ea) Student School Room Chairs w/ Desk Tops

(3 ea) Fiberglass Picnic Table

(1 ea) Metal Index Cabinets, 8-Drawer

(9 ea) Folding Tables, 5’ & 8’

== MAIN SERVER & COMPUTERS ==

Gateway 7210 Network Server, Plus Hubs & Switches With Fiber Optic Cables & Cards; Dual Mother Board w/ 2 Processors; Pentium III 800 w/ 2 ea. 512 Memory 1 G; Mega Raid (ADAPTEC) w/ 64 MB RAM, 30 GB SCSI Array x 3 = 90 GB Array, 48 Speed CD ROM; Scorpion Back Up Tape Drive, 3 ea. 3110 3 Com Super Stack Hub, 2 ea. 3 Com Switches, 1 Watch Guard Fire Box, APC UPS Backup Battery, Various Software To Include Anti-Virus

(3 ea) Gateway Pentium III 667, 64 MB RAM, 14.3 GB HD w/CD & Floppy

Gateway Pentium III 600, 64 MB RAM, 8 GB HD plus 6 GB HD w/CD & Floppy

Gateway Pentium III 933, 128 MB RAM, 20 GB HD w/CD & Floppy

(5 ea) Gateway Pentium III 600, 64 MB RAM, 10 GB HD w/CD & Floppy

Gateway Pentium III 550, 128 MB RAM, 10 GB HD w/CD & Floppy

Gateway Pentium III 550, 96 MB RAM, 10 GB HD w/CD & Floppy

Gateway Pentium III 650, 128 MB RAM, 14 GB HD w/CD & Floppy

(3 ea) MAG Pentium III, 64 MB RAM, 10 GB HD w/CD & Floppy

Gateway Celeron 366, 160 MB RAM, 3 GB HD w/CD & Floppy

(2 ea) Gateway Pentium II 96 MB RAM, 6 GB HD w/CD & Floppy

Gateway Celeron 366, 32 MB RAM, 3 GB HD w/CD & Floppy

Gateway Celeron 500, 256 MB RAM, 8 GB HD w/CD & Floppy

(2 ea) Gateway Celeron 400, 64 MB RAM, 6.5 GB HD w/CD & Floppy

Gateway PMMX 200, 64 MB RAM, 2 GB HD w/CD & Floppy

Gateway Celeron 633, 128 MB RAM, 20 GB HD w/CD & Floppy

(2 ea) Gateway Celeron 400, 64 MB RAM, 20 GB HD w/CD & Floppy

Gateway Celeron 500, 64 MB RAM, 20.5 GB HD w/CD & Floppy

Gateway Celeron 663, 128 MB RAM, 20 GB HD w/CD & Floppy

Celeron 366, 64 MB RAM, 10 GB HD w/CD & Floppy

Gateway Pentium II 400, 128 MB RAM, 10 GB HD

Gateway Pentium II 350, 128 MB RAM, 10.8 GB HD w/CD & Floppy

Gateway Pentium III, 1.0 GH2, 128 MB RAM, 20 GB HD w/CD & Floppy

Gateway Pentium II 200 MMX, 96 MB RAM, 2 GB HD w/CD & Floppy

(3 ea) Gateway Pentium II 350, 64 MB RAM, 3 GB HD w/CD & Floppy

HP Laser Jet 3200 4-in-1 Machine

HP Office Jet D135 All-in-One Machine

HP Laser Jet 4 Plus Printer

HP Laser Jet 3330 All-in-One Machine

(1 ea) Brother HL-1240 Laser Printer

(13 ea) HP Model 1100 & 1200 Laser Jet Printers

Various Scanners

== RACKING, BENCHES, & SHELVES ==

(200+) Wood Shop Benches (Some on Castors)

(32 ea) Work Order Stands

(160+) Wood Saw Horses

(20 ea) Metal Roll-Around Tables, 9’ & 10’ x 3’& 4’ W, Also 4’ x 12’

(10 ea) 6’ x 3’ Metal Shop Benches

Heavy Duty Pallet Racking, up to 18’ Tall

Cantilever Racking

Roll-A-Round Raw Stock Racks

Sheet Metal Racks

Good Selection of Metal Shelving, 12” & 18”

Snap Together Racks

(28 ea) 4 & 5 Shelf Wood Parts Racks

Note:  Misc. pieces of this inventory to be sold on DAY 1, Majority to be sold on DAY 2.

== AUTOCLAVE & ACID ETCH CLEANING LINE ==

Melco Autoclave, 400 Degrees F, 150 PSI, 96” Diameter, 20’ Working Length, Nat’l BD No. 1047, Built 2000, S/N-3139, Computer Control System w/ 2 ea Roll-In Tables & Table Carts

9 Tank Acid Etch Cleaning Line

Tank #1 Alkaline Cleaning Solution (Tureo)

Tank #2 Alkaline Rinse Solution (DI-Water)

Tank #3 FPL Cleaning Solution (Sulfuric Acid/Sodium)

Tank #4 FPL Cleaning Solution (DI-Water)

Tank #5 Final FPL Rinse Solution (DI-Water)

Tank #6 Phosphoric Acid Anodizing Solution

Tank #7 1^st PAA Rinse (DI-Water)

Tank #8 Final PAA Rinse (DI-Water)

Tank #9 Drying Chamber

Has Automatic Tech Atmospheric Evaporator, Aldonex Model T-415-15CR-CCV Air Cooled Power Supply, Penguin Filter Chambers & Pumps, Process Technology Immersion Heaters

== FANS ==

(19 ea) Dayton & Various Other Mfg. 48” Portable Shop Fans

(25 ea) 30” Pedestal Fans

(44 ea) 36” Pole Mounted Oscillating Fans

== OVERHEAD HOISTS ==

(2 ea) Budget Electric Overhead Hoists 1 Ton w/ Electric Trolley & Bridge System, Trolley 20’ Wide, Bridge 95’ Long

(1 ea) Budget Electric Overhead Hoists 1 Ton, W/Electric Trolley & Bridge System Trolley 18’ Wide, Bridge 45’ Long

== NEW EXPENDABLE INVENTORY==

This is a Large Inventory for Commercial Aircraft Application and there are Large Counts of All the Following Types of Inventory:  BAC-Bolts, BAC Washers, BAC Lock Nuts, BAC Castle Nuts, BAC Screws, BAC Bushings & Bearings, BAC Solid Rivets, NAS Bolts, NAS Nuts, NAS Roll Pins, NAS Blind Bolts, NAS O-Rings, AN Bolts, AN Castle Nuts, AN Screw Counter Sink & Standard, MS Nuts, Camloks, Cherry Rivets, Cherry Max Rivets, Nut Plate, MS & NAS Solid Rivets, BAC Solid Rivets, A Very Large Inventory of Bearings, Rod Ends, Sleeves, & Bushings, Hinge Stock Boeing & Douglas Small Parts To Include Brackets, Hinges, Torque Tubes, Panels, Fittings, Doublers, Formers, Covers, Skins, Gap Seals, Springs, Nut Plate, Seals, Packing, Etc.

Note:  The Majority of this Inventory has the Original Material Certs from the Manufacturers.  This Inventory will be Sold in Two Groups, All Hardware as One Group, and All the Small Parts as a Second Group.

== ALUMINUM, STAINLESS, HONE COMB & MISC ==

(Approx 25) Sheets of .012 Aluminum 4x12

(Approx 29) Sheets of .025 Aluminum 4x12

(Approx 32) Sheets of .020 Aluminum 4x12

(Approx 15) Sheets of .040 & .063 Aluminum Sheets 4x12

(Approx 12) Sheets of .050 Aluminum Sheets 4x12

(Approx 15) Sheets of .032 Aluminum 4x12

(Approx 12) Sheets of .016 Aluminum 4x12

(Approx 8) Sheets of .071 Aluminum Various Sizes

(3ea) Sheets of .015 Aluminum 4x12

Several other Sizes of Aluminum in Various Size Sheets

(Approx 20) Sheets of Stainless to include .032, .020, .050, .063, .090, etc. In Various Size Sheets

(210+) Sheets of Honey Comb Sizes include ¼” – 4” in Various Size Sheets

(approx 75) Precut Sections of Honey Comb for Control Surfaces to Include Flaps, Vanes, Tabs, Etc. For DCC-9, DC-8, 737

Various Slabs of Aluminum Raw Stock

Several Pre-Formed Leading Edges for Control Surfaces

Large Selection of Aluminum Extrusions & Formers, Aluminum Rods, & Bars

Several Repair Skins & Doublers for Various Aircraft

Large Selection of Bar Stock to Include Aluminum, Steel, Brass, etc. ½” Diameter – 2” Diameter

In Addition to all of the above, There are Several Small Left Off Sheets of Aluminum & Honey Comb That Have Been Cut Off.

== PAINTS, LUBRICANTS & CHEMICALS ==

Thinners, Hardeners, Cohathanes, Polyurethane Coatings, Anti Chafe Coatings, Paints, Poly Top Coats, Epoxy Primers, Alodnine, Resin, Contact Adhesives, Spray Paint, LPS Lubricants, ets.  Good Selection

== SHOP SUPPLIES ==

Very Large Selection of Self Adhesive Sanding Pads, Scotch Brits, Buffing Pads, Power Lock Sanding Discs, Barrel Sanders, Grinding Stones, Sanding Paper, Gloves, Bristle Discs, Spiral Wound Bands, Masking Tape, Foil Tape, Mixing Cups & Bowls, Saw Blades, Welding Wire, Paint Brushes, Vapor Cartridges, Respirators, Kleen Guard Protective Apparel, Face Shields, Ear Plugs, Tongue Depressors, Velcro, Etc.

== PLANT MAINTENANCE INVENTORY ==

Electrical Inventory, Equipment Piece Parts & Inv., Forklift Parts, Grease, Oils, Filters, Chain Link Fence & Posts, Lumber, Plywood, etc.

== SPECIAL TOOLS, BONDING FIXTURES, CONTROL SURFACE JIGS & ALIGNMENT FIXTURES ==

Very Large Selection of Tools & Fixtures will Include the Following Types of Aircraft:  Boeing 727, 737, 747, 757, & 767, Douglas DC-8, DC-9/MD-80, DC-10, Misc. Gulfstream G-II & GIII, Misc. JT-8D & CF6 Tooling.  Includes Tooling & Fixtures for Slats, Spoilers, Elevators, Tabs, Doors, Rudders, Flaps, Pylons, ADF Ant., Liners, Vanes, Leading Edges, Cowls, etc. 

AUCTIONEER’S NOTE:  Aero Fabricators has been closed.  The Secured Creditors have contracted with Starman Bros. Auctions, Inc. to sell certain assets at Public Auction.  This Auction will consist of a very good selection of Late Model CNC Equipment as well as some very good Newer Machine & Shop Equipment, Sheet Metal Equipment, Autoclave, Cleaning Line, etc.  Also offered is a large selection of Inventory, Raw Stock & Very Nice Office Equipment & Computers.

Everything sells “AS IS, WHERE IS” with no warranties implied or expressed.  Neither the auctioneer nor the secured creditors shall be liable for any incorrect description, fault, or defect.  Everything positively sells to the highest bidder.  Payment must be made in full day of sale.  No property removed until settled for.  Auctioneer not responsible for accidents or stolen property.  All counts are approximate.

PAYMENT TERMS:  Cash, Cashiers Checks, Traveler’s Checks, Certified Funds, or Company Check ONLY IF ACCOMPANIED BY BANK LETTER OF GUARANTEE!!  NO ACCEPT IONS!  Wire Transfers will be Accepted with a 20% NON-REFUNDABLE Deposit, Made In One Of The Forms Listed Above, Payable Day of Sale.  We also accept MasterCard & Visa.  There is an additional charge of 3% to all credit card transactions.  This is in addition to the 5% Buyers Premium.

NOTE:  A 5% BUYERS PREMIUM WILL APPLY TO ALL PURCHASES AT THIS AUCTION.

PROXY BIDS:  If you cannot attend this auction, we will bid on your behalf.  For information call Starman Bros. at 402-592-1933 or go to our website at www.starmanauctions.com and click on Upcoming Auction and scroll down to Proxy Bid Form or click here

REMOVAL & RIGGING:  Once an item is sold, the winning bidder is responsible for its removal.  Removal may begin after payment in full and must be completed by the posted deadline.  NO EXCEPTIONS OR EXTENSIONS.  Starman Bros. Auctions is not a Rigging Company.  Two Rigging Companies will be on Site to offer quotes and/or do loading any equipment that requires disconnection of any type must be done by provided rigger.  You will not be allowed to bring in your own riggers.  Any small items or equipment that does not require disconnecting can be loaded by buyer or Starman Bros. Auctions’ Personnel.